qbinary - Network

I was wondering @threemaapp you are legally obligated to cooperate with law enforcement agencies. But in that case you still are not able to...

I was wondering @threemaapp you are legally obligated to cooperate with law enforcement agencies. But in that case you still are not able to decrypt my message traffic on your end right? The private encryption keys are stored on my local device. Or is there a mechanism for you to retrieve those in case of a legitimate legal investigation? And as soon as PFS in picture it should be inherently impossible to read my packages anyways...

@revisionpartyShot with #sonyalpha 7 m III

@revisionparty
Shot with #sonyalpha 7 m III

@threemaapp and this only worked with a full data backup including big media as a base. Probably because of encrypted database files or...

@threemaapp and this only worked with a full data backup including big media as a base. Probably because of encrypted database files or smth. which won't be exported when creating a non-big-media-included backup.

@threemaapp I encountered a problem which is a no-go for a serious messanging App, which needs to be fixed!!My dad got a new phone and...

@threemaapp I encountered a problem which is a no-go for a serious messanging App, which needs to be fixed!!
My dad got a new phone and needed to transfer a 17GB Backup which failed over and over on Threemas end.
We worked around by doing a full data backup, deleting all big files in the encrypted zip, restoring the backup on the new phone and before restarting Threema after recovery, we transfered the "sdcard/Pictures|Movies|Music|Documents/Threema" via adb.

Shot with Sony Alpha 7 III with an analog Minolta Rokkor MD 50mm lens1/500s f/2.5#spring #photography #sonya7ii #sony #sonyalpha...

Shot with Sony Alpha 7 III with an analog Minolta Rokkor MD 50mm lens

1/500s f/2.5

#spring #photography #sonya7ii #sony #sonyalpha #sonyalpha7 #analoglens #minolta #rokkor50mm

I also finished cleaning another circuit board in addition to the button board I fixed.I cleaned all the potentiometers thoroughly because...

I also finished cleaning another circuit board in addition to the button board I fixed.
I cleaned all the potentiometers thoroughly because they were dusty and sticky as hell. And then I used contact spray again, to improve the function and accuracy of them. I reinstalled the board, and one can see the clear difference between the restored and the still dirty board 😂

More progress on my JD-800:I had to replace some of the control buttons because the didn't work properly anymore.I ordered similar...

More progress on my JD-800:
I had to replace some of the control buttons because the didn't work properly anymore.
I ordered similar looking switches on AliExpress, but turns out that the pinout is different.
So I had to hack around that and solder small copper legs to the contacts and reroute them to fit accordingly.
#roland #jd800 #synthesizer #restauration

Can someone explain to me why the #iwata kind of people dies out? Why are all the #CEO s #idiots? Is it really that one can only be...

Can someone explain to me why the #iwata kind of people dies out? Why are all the #CEO s #idiots? Is it really that one can only be successful when beeing an asshole?

Another problem was the rotary encoder for the waveform select. It just jumped randomly when turning. So I took out the encoder and...

Another problem was the rotary encoder for the waveform select. It just jumped randomly when turning. So I took out the encoder and literally flooded it with contact spray. I turned it a bit, and boom: Works like new!
#rolandjd800

Then I started disassembling the control panels because some of the buttons don't work, or don't work all the time. I wasn't...

Then I started disassembling the control panels because some of the buttons don't work, or don't work all the time. I wasn't able to fix them by applying contact spray, because they are soft press rubberdome/membrane keys...
So I ordered some on AliExpress which look similar. Now i have to wait...

Then I also had to fix the keyboard membranes because the upper half did not trigger correctly. I used #WD40 specialist contact spray. It...

Then I also had to fix the keyboard membranes because the upper half did not trigger correctly. I used #WD40 specialist contact spray. It works great now!

First of I had to clean every key and reglue the weights. In addition i sealed it with epoxy to block the red glue rests from dripping out...

First of I had to clean every key and reglue the weights. In addition i sealed it with epoxy to block the red glue rests from dripping out again.

I accidentally have taken on a project, which is more work intensive than expected!I talked about amazing #80s and #90s synth music with my...

I accidentally have taken on a project, which is more work intensive than expected!
I talked about amazing #80s and #90s synth music with my friends family. Then the mom told me "I've got an old broken #Roland synth, do you want it" I said yes.... And here I am!
#rolandjd800

Kadse!#CatsOfMastodon I expanded by camera hardware by a digital one... A Sony Alpha 7 M iii. But analog photography won't lose its...

Kadse!
#CatsOfMastodon

I expanded by camera hardware by a digital one... A Sony Alpha 7 M iii. But analog photography won't lose its place in my heart :D

FujiColor 200 @ Minolta XG-M#analogphotography #photography #minolta #minoltaxgm #fujicolor200 #forest #godrays

FujiColor 200 @ Minolta XG-M
#analogphotography #photography #minolta #minoltaxgm #fujicolor200 #forest #godrays

Ilford Delta 100 @ Minolta XG-M#honda #preludeba4 #HondaPrelude #analogphotography #minoltaxgm #ilford #ilforddelta100

Ilford Delta 100 @ Minolta XG-M

#honda #preludeba4 #HondaPrelude #analogphotography #minoltaxgm #ilford #ilforddelta100

I assembled parts of the new #Cerealizer motherboard. Just the bare minimum, to test the hardware and port the firmware to the new board. A...

I assembled parts of the new #Cerealizer motherboard. Just the bare minimum, to test the hardware and port the firmware to the new board.

A rough version of the #firmware is also running already.

And I found a major flaw in the PCB design: I used some ADC pins of the #esp32. Turns out, they can only be used as inputs. But there are still plenty unused GPIOs, so I will add some copper bridges :D

Bothering with #politics is like thinking about how to avoid the impact whilst in mid air...

Bothering with #politics is like thinking about how to avoid the impact whilst in mid air...

Reinforcement Ring:I wasn't able to print those rings with my old #ender3pro because of the extremly right tolerances this print...

Reinforcement Ring:
I wasn't able to print those rings with my old #ender3pro because of the extremly right tolerances this print requires.

The wall is printed with a 0.4mm nozzle in #vasemode / #spiralized which needs the rings to have pretty much exactly a gap of 0.4mm. and the seam of my old printer completely destroyed that. But my new #bambulab #p1p crushes the job.

Yesterday I modelled and printed some missing parts for the silos.The silos are constructed as follows from top to bottom:- Silo Lid- Silo...

Yesterday I modelled and printed some missing parts for the silos.

The silos are constructed as follows from top to bottom:
- Silo Lid

- Silo reinforcement ring
- Silo Wall
- Silo Reinforcement ring

- Dispenser Mechanism
- Feed Screw with Stepper Motor

#Cerealizer